Well, I spent about 13 hours over the weekend working on it, and KX1 #1721 is alive and kicking! I meticulously checked all solder joints and toroid leads (learned that one by experience with other kits!) Now on to the 80/30 and ATU...
One problem, though. I did not have time to do much transmit testing, but the little that I did, the KX1 was only putting out about 300 mW on both bands. Not sure why, I still need to go through the troubleshooting steps. But everything else checks out fine, so hopefully it'll be something simple.
73 de K6BQ
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
