Gang!
The construction of KX1 #1727
<
http://www.kc5wa/kx1/1727.html> went really smooth all
the way through the build. ALL the "checks" were well
within spec's. It was even okay after adding the 30m
mod with superb RX Power out was about 3watts. Then I
built and installed the ATU during the alignment and
test the first several checks on L0-L3, C0-C3, N0-N3
were okay! When I tried to calibrate the ATU "Nada". I
noticed the PA was "HOT". So was my DL. the SWR reading
was r9.9 Power was "P0.0". Now when checking the RX is
dead. Audio (white noise)is there and strong so is side
tone... Any Ideas where to look?
RC kc5wa
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
