KX1 Firmware for KXB30

[engineercm]

I have a KX1 S/N 2528 with 1.02 MCU firmware and would like to install the
KXB30.  Will the 1.02 firmware work or do I need to replace it with 1.01.
 Same question (different rev. #'s)  for ATU.

I've searched the Nabble reflector and haven't found the answer.  Thanks
for the bandwidth.

--
72,

Clark WU4B

*"It is vain to do with more what can be done with less."-- *William of
Occam (1288 AD - 1348 AD)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Clark,

The 1.02 Firmware will handle the KXB30 as well as the KXB3080. BTW,
Elecraft does not sell back levels of firmware.  They are all 'backlevel
compatible'.

I trust you have the KXB30 option in hand - it is no longer available
from Elecraft.

73,
Don W3FPR

On 4/23/2013 5:06 PM, Clark Macaulay wrote:
> I have a KX1 S/N 2528 with 1.02 MCU firmware and would like to install the
> KXB30.  Will the 1.02 firmware work or do I need to replace it with 1.01.
>   Same question (different rev. #'s)  for ATU.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill K9YEQ]

Clark,

If you do not, I believe I do and it is available for postage /shipping.

73,
Bill
K9YEQ

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Don Wilhelm
Sent: Tuesday, April 23, 2013 6:13 PM
To: Clark Macaulay
Cc: [hidden email]
Subject: Re: [Elecraft] KX1 Firmware for KXB30

Clark,

The 1.02 Firmware will handle the KXB30 as well as the KXB3080. BTW,
Elecraft does not sell back levels of firmware.  They are all 'backlevel
compatible'.

I trust you have the KXB30 option in hand - it is no longer available from
Elecraft.

73,
Don W3FPR

On 4/23/2013 5:06 PM, Clark Macaulay wrote:
> I have a KX1 S/N 2528 with 1.02 MCU firmware and would like to install
> the KXB30.  Will the 1.02 firmware work or do I need to replace it with
1.01.
>   Same question (different rev. #'s)  for ATU.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[engineercm]

I have two of these boards:  Rev. B and Rev B1.  I can't see what the difference is but assume the B1, being newer, must have fixed something.  The Rev B board is actually cleaner and better built. What would be the downside of using the B?  I guess I could try it and see...

72, Clark WU4B

[Don Wilhelm-4]

Clark,

I was not aware that there were 2 revisions of the KXB30 board.  I have
dealt with a number of KX1s with the KXB30 installed, and have found no
difference in performance.

I am a bit puzzled by your subject line.  There is no relationship to
firmware with the KXB30 board, either 1.01 or 1.02 will work just fine.

73,
Don W3FPR

On 4/30/2013 8:29 PM, engineercm wrote:
> I have two of these boards:  Rev. B and Rev B1.  I can't see what the
> difference is but assume the B1, being newer, must have fixed something.
> The Rev B board is actually cleaner and better built. What would be the
> downside of using the B?  I guess I could try it and see...
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html