As I mentioned in a previous postingto QRP-L, I worked the ARCI contest
a bit yesterday afternoon while operating Pedestrian Mobile with my KX1.
I decided to try logging with my Palm Pilot and Golog so I used an
elastic band off of a bunch of Broccoli to attach the Palm to back of
the KX1
and it worked pretty well. I found that if I slipped the edge of the
elastic under
the tuning knob it actually created a little bit of drag on the knob
and made the
rig a bit less prone to accidental frequency changes. Also with Golog
there is
some blank space at the bottom of the input screen so I managed to
position the
elastic around the Palm so that I wasn't blocking anything on the
screen. The big
advantage over paper is the I had automatic duping and didn't have to
worry about
looking at my watch to log the time for the QSO (Golog does that
automatically in
UTC). The disadvantage is that my "Graffiti" skills are very rusty so I
had to ask for a
few repeats on the ARCI #s as I flubbed inputting them on my Palm in
real time.
I had no problem just going back and putting in the RST and SPC but my
short term
memory for a 4 digit random number is about 3 seconds!
It is probably overkill for casual operating but I found it very useful
for
/PM contesting. I also used a slightly bigger but flat stylus from one
of my old Newtons and I
was easily able to keep it in my hand while at the same time sending
with the KXPD1,
paddle so i didn't have to keep searching around for something to write
with.
Michael VE3WMB
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
