Reston,
I finished mine a couple of weeks ago... with the same V(in) and same watt
meter also carefully calibrated, I get 3.4 on 20M, 3.75ish on 30M and 4 on
40M into an old Heath Cantenna (unmeasured resistance)
72,
Mac, W8XF
Hi Folks,
I just completed a new KX1 serial number >1000. It passed all checks and
seems to be working perfectly, except I find the power out is marginally
low.
I use a WM-1 which is carefully calibrated. In my case, at 13.4 V, I get 2
watts out on 20M and 3 watts on 40. This appears to be just within specs
for
40, and at least 500 mw low on 20. I am a very experienced builder,
including two K2s and two K1s. Are my results within the normal range, or
....suggestions?
Preston Douglas WJ2V
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
