KX2 alt MD

[Greg Franklin]

A small group of us in the Pacific NW operate voice and digimodes on the
lower bands (40m, 80m) and we seem to be frequently shifting between voice
and digimodes.  It would be nice if a future firmware update removed the
necessity of the alt MD feature and put the alternate mode access in the
MODE button itself.  That way when switching from LSB voice to a USB
digimodes, it would simply be a matter of accessing a front panel button
rather then diving into the submenu for each change from LSB to USB and
vice versa.  Just a thought.
73
Greg
VA7BC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Greg,

Use DATA A mode.  Not only dooes it solve your request, but it also sets
equalization flat and sets compression to zero.

73,
Don W3FPR

On 11/6/2016 12:39 PM, Greg Franklin wrote:
> A small group of us in the Pacific NW operate voice and digimodes on the
> lower bands (40m, 80m) and we seem to be frequently shifting between voice
> and digimodes.  It would be nice if a future firmware update removed the
> necessity of the alt MD feature and put the alternate mode access in the
> MODE button itself.  That way when switching from LSB voice to a USB
> digimodes, it would simply be a matter of accessing a front panel button
> rather then diving into the submenu for each change from LSB to USB and
> vice versa.  Just a thought.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]