KX2 first impressions and comments

[w4sc-2]

Managed to snag a KX2 at Dayton and had it on the air late Sunday afternoon.  Worked a couple of stations on SSB, but mostly listening.  

KX2 will be great for back-packing / very portable ops. Don’t expect KX3 with ‘roofing filter’ RX performance.

Controls of the KX2 are intuitive and well thought out.  Easy to learn.  Like the band change implementation.

Don’t like the main knob, needs a ‘dimple’.  I had issue with knob drag on the encoder bearing/panel mount sleeve.  Corrected by removing knob and carefully re-installing and leaving required knob to mounting sleeve clearance to stop drag.

Speaker can easily be over driven.  AF level set correctly, very good SSB performance.  CW is great!

No 6 meters.  I would gladly give up 12 meters for 6 meter coverage.  How about a KX2-6,,, Wayne/ Eric??

All you new owners enjoy your KX2.  It is a sweet little radio.

Now, back to 40M / 20M listening.

de Ben W4SC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[wayne burdick]

On May 23, 2016, at 8:35 PM, "w4sc" <[hidden email]> wrote:

> Managed to snag a KX2 at Dayton and had it on the air late Sunday afternoon.  Worked a couple of stations on SSB, but mostly listening.  
>
> KX2 will be great for back-packing / very portable ops. Don’t expect KX3 with ‘roofing filter’ RX performance.
>
> Controls of the KX2 are intuitive and well thought out.  Easy to learn.  Like the band change implementation.
>
> Don’t like the main knob, needs a ‘dimple’.  I had issue with knob drag on the encoder bearing/panel mount sleeve.  Corrected by removing knob and carefully re-installing and leaving required knob to mounting sleeve clearance to stop drag.

I would avoid using a dimple, as this would tempt the operator to apply more radial force to the knob, hastening encoder wear. Instead, try running your finger lightly along the edge of the knob as you rotate it. This works surprisingly well for fast QSYs. (Also make use of coarse tuning with the OFS control when VFO A is set for fine tuning.)

73,
Wayne
N6KR


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]