Pierre,
That may be normal behavior, the power will drop to 5 watts if either
low voltage occurs or if a high PA temperature condition occurs.
If you are operating digital modes, I suspect that the high PA
temperature is causing the drop in power.
Check the BAT MIN setting in the KX2 menu. See page 43 of the manual.
The proper setting varies depending on the battery type, and the default
is 10 volts.
73,
Don W3FPR
On 12/22/2019 6:26 PM, VE2PID wrote:
> Hi folks .. A question about the KX2: I saw this on other posts, and
> also experienced it in portable operations: ''The KX2 was able to pump
> out a full 10 watts of power for a little over one hour, then as the
> voltage dropped, it reduced output to 5 watts.''. So it seems to be
> normal, but is it documented somewhere in the KX2 specs?
>
> (FYI, I use an external rechargeable 12V 3000mAh Lithium ion Battery Pack.)
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
