KX2 tx low power on 80M SSB

[Reed Fite]

Dave, mine does the same thing on 10 meters. Wondering if a firmware change might fix it. Press Tune for a second & the problem goes away. The KX3 doesn't have this problem. 
73,Reed  W4JZ


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nate Jedinak]

Elecraft indicated this behavior pointed to a failure in the output block. Since Elecraft has mine now for repair of this issue, we will get a definitive answer as to whether this is firmware or hardware.

—Nate

Sent from my iPhone

> On Mar 22, 2021, at 12:02 AM, Reed Fite <[hidden email]> wrote:
>
> Dave, mine does the same thing on 10 meters. Wondering if a firmware change might fix it. Press Tune for a second & the problem goes away. The KX3 doesn't have this problem.
> 73,Reed  W4JZ
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]