KX3/2m driving an SG-Labs 1296Mhz transverter configuration question

[w4sc-2]

Paul,

Try setting the XV2 (Adr) = INT trn1 if it is available in the menu.


My KX3 is stored away currently, so I can’t check it,, however The K3 works as follows…  Reference P68 of K3S manual for more detail.

• XVn ADR specifies a transverter select address. Use INT. TRN0-9 with the K144XV (see XVn ADR description for details).

I hope the KX3-144 is implemented like the K3 in this regard, as I plan to use mine as a uWave IF along with a PX3 also.

Anyone here have answer??

73 de Ben W4SC


Sent from Mail for Windows 10

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[w4sc-2]

Dave,

Try:

XV2 (on) = Yes
XV2 (RF) = 1296      1296 your transverter band RF freq.
XV2 (IF) = 50        50 MHz for the KX3-2M option
XV2 (Pwr) = 3.0
XV2 (OFS) = 0
XV2 (Adr) = INT trn1 Selects INTERNAL transverter.

I would be interested to know how the above works for you.

73 de Ben W4SC.

Sent from Mail for Windows 10

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html