Hi all,
I have the following effect on my KX3 equipped with the 2m module:
Max Power is set to 3.0W
If I set to TUNE I can increase the rf from 0 up to eg. 3.0W.
But the power does only increase to about 650mW and the most confusing is
the fact that in the display the power jumps back to 0.9W!
A short movie can be see here:
https://www.mycloud.ch/l/P00BBFDF3256A56FD3D07AB35274144A50BF5F24AB9A6B837983B214C77EE5ADAUnmount all to check. The nut was no more soldered to the final transistor.
Reload firmware
Reload the last configuration when the TRX was working well.
>> Still the same confusing effect.
73
Armin
HB9MFL
--
Sent from:
http://elecraft.365791.n2.nabble.com/______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
