KX3 2m module and problems

[W6PQL]

Elecraft seems to have done a nice job on the transverter module for the
KX3, just installed/tested one here. Pretty satisfied, but I'm wondering
if anyone else  notices the strange frequency hopping in cw-in-ssb mode
on 2m? Tone tends to warble a bit (hops frequency about 10 Hz). Doesn't
seem to be there quite as bad in regular cw mode, but still there. Just
detectable on 6m, and not apparent 28MHz and below, so this may be
related to the stability limitations discussed before. That said, I'm
hoping there will be a firmware upgrade to address this, as it make CW
almost unusable on 2m...

Thanks, Jim
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[wayne burdick]

We'll look at this on the next KX3 firmware go-around.

73,
Wayne
N6KR


On Sep 15, 2014, at 12:13 PM, Jim Klitzing <[hidden email]> wrote:

> Elecraft seems to have done a nice job on the transverter module for the KX3, just installed/tested one here. Pretty satisfied, but ...Tone [in CW-in-SSB] tends to warble a bit (hops frequency about 10 Hz). Doesn't seem to be there quite as bad in regular cw mode...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]