KX3 2m module

[1lasportsman 1lasportsman]

I installed a 2m   for the KX3  and it all appeared to set up great.

The only problem is it will not select the 2 meter antenna (antenna 2).

do I need to somehow tell radio that 2 meters is on antenna 2 .

I have read the manual and no where can I find This.

Asking before opening radio up again

Bill

WF9M
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dave Erickson]

On 8/31/2020 5:24 PM, 1lasportsman 1lasportsman wrote:

> I installed a 2m   for the KX3  and it all appeared to set up great.
>
> The only problem is it will not select the 2 meter antenna (antenna 2).
>
> do I need to somehow tell radio that 2 meters is on antenna 2 .
>
> I have read the manual and no where can I find This.
>
> Asking before opening radio up again
>
> Bill
>
> WF9M

Bill,

The 2m module can ONLY use ant2 and should automatically select it as
soon as you switch to the 2m band on the KX3.

--
Dave Erickson
k0dom
73

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dave Erickson]

On 8/31/2020 5:45 PM, Dave Erickson wrote:

> On 8/31/2020 5:24 PM, 1lasportsman 1lasportsman wrote:
>> I installed a 2m   for the KX3  and it all appeared to set up great.
>>
>> The only problem is it will not select the 2 meter antenna (antenna 2).
>>
>> do I need to somehow tell radio that 2 meters is on antenna 2 .
>>
>> I have read the manual and no where can I find This.
>>
>> Asking before opening radio up again
>>
>> Bill
>>
>> WF9M
>
> Bill,
>
> The 2m module can ONLY use ant2 and should automatically select it as
> soon as you switch to the 2m band on the KX3.
>

Also, this should not be confused with ANT2 which is only available if
you have a KXPA-100 connected.

--
Dave Erickson
k0dom
73

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]