Yes, it is normal. To reduce the effect, you can enable the "VFO NR" setting in the menu, and/or enable "RX SHFT=8" for the bands where the tuning noise is annoying.
73, Matt VK3RQ
On 13/04/2013, at 6:03 AM, Hans Østnell <
[hidden email]> wrote:
> Hi group!
>
> Just noticed that the VFO encoder in my KX3 is generating noise on a couple
> of bands when tuning, On 10 MHz a just a little, on 14 MHz a little bit
> more, a bit worse on 18 and 21 MHz, and even more on 24 and 28 MHz. Nothing
> on 50 MHz and nothing below 10 MHz.
>
> Is this normal, or does anyone have a hint of any solution of this problem?
>
> The noise it's not really that loud, but pretty annoying when tuning around.
>
> Regards,
>
> Hans / LA2MOA
> Vardø, Arctic Norway
> KQ50ni - EU141
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
