Hi John,
I had a similar issue with an odd High-VHF split. For odd splits, we
have to use the KX3 itself. The utility allows only standard tx/rx
splits to be entered..
1. Enter the transmit freq into VFO A;
2. Tap the A/B switch;
3. Enter the receive freq into VFO A;
4. Tap the A/B switch;
5. Hold SPLIT to allow different tx and rx frequencies.
When this is done properly, VFO B will show your tx frequency, and VFO
shows your rx frequency.
If you'd like to you can memorize the channel. I would. Set the PL
frequency first if the repeater needs it.
73!
matt
W6NIA
On Fri, 3 Apr 2015 01:12:11 +0000 (UTC), you wrote:
Matt Zilmer, W6NIA
--
"Always store beer in a dark place." -R. Heinlein
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]