KX3 80/160 metter filter modification: who may need it, and why

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

KX3 80/160 metter filter modification: who may need it, and why

wayne burdick
Administrator
Recently we've seen an increase in interest in the changes to the 80 and 160 meter filtering added to the KX3 in October of 2012.

Most operators who have the older circuitry will never experience band conditions bad enough to warrant making the modifications, since even in that case, the KX3's dynamic range would put it in the top ten on Sherwood's list (about 90 dB at 2 kHz). But if you might be a candidate for the changes, please the following document carefully:

  http://www.elecraft.com/manual/KX3%2080M-160M%20Rx%20Improvement%20-%20Owner%20version%20B.pdf

73,
Wayne
N6KR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html