KX3 ACC1 Spliter

[Elecraft mailing list]

I want to know if the KX3, PX3, etc ACC1 can be broken out to go 2 devices such as a PC or Sidekar.  Appears to me to be a serial network like Icom's CV system.

Thanks,
Stan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe DeVincentis]

I run a SteppIr with my KX3.  The KX3 will send out its current frequency via ACC1 so the SteppIR can automatically change bands.  I have a splitter going from the PC to the SteppIR and the KXPA100 (which eventually chains to the KX3 via my PX3).  

It all works just fine.  If the SideKar sends data on the serial port at the same time as the PC or KX3, then that could be a problem.  For the SteppIR, it is a listen only device.

Works just fine.

Joe
KO8V

> On Jul 21, 2016, at 9:27 PM, stanley frady via Elecraft <[hidden email]> wrote:
>
> I want to know if the KX3, PX3, etc ACC1 can be broken out to go 2 devices such as a PC or Sidekar.  Appears to me to be a serial network like Icom&#39;s CV system.
>
> Thanks,
> Stan
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]