KX3 AGC HLD settings

[Grant Youngman]

The KX3 manual indicates that the AGC HLD setting is in “seconds”.  It doesn’t appear that “001” in the three digit display is one second.

I suspect its either “(.)XXX” seconds or “X(.)XX” seconds.  I must have missed something in the book somewhere.  A search on Nabble, update history, etc. didn’t go anywhere either.

Can someone shed some light?

Thanks … Grant NQ5T


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Cady, Fred-2]

Hi Grant,
When I did my KX3 books I somehow figured out it is 0.00 to 2.00 seconds.  That's what the K3 does and I assume the KX3 is the same.
Cheers,
Fred KE7X

Author of:
“The Elecraft K3S and P3 – Getting the Most out from Your High Performance Station”.
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Portable Elecraft KX3 – Going for the Summit with the KX3 and KX3-2M/4M"
“The Elecraft KX-Line – The Complete Station”
“The Elecraft KPA500 and KAT500 – the K-Line Dream Station”
Printed, coil bound copies of these are all available at www.elecraft.com
PDF files available from www.ke7x.com
“The Elecraft KXPA100, PX3 and 2M/4M Transverters – Assembling the KX3-Line Station” printed copy available at www.lulu.com and pdf from www.ke7x.com.
Plus a book dedicated to the K3S upgrades for the K3 and a 3rd Edition of the K3 book are works in progress.
Free guides at ke7x.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
KAT500 and KXPA500 Tuner Operation
http://www.ke7x.com/home/kat500-and-kxpa100-tuners


________________________________________
From: Elecraft <[hidden email]> on behalf of GRANT YOUNGMAN <[hidden email]>
Sent: Wednesday, October 28, 2015 10:07 AM
To: Elecraft Reflector
Subject: [Elecraft] KX3 AGC HLD settings

The KX3 manual indicates that the AGC HLD setting is in “seconds”.  It doesn’t appear that “001” in the three digit display is one second.

I suspect its either “(.)XXX” seconds or “X(.)XX” seconds.  I must have missed something in the book somewhere.  A search on Nabble, update history, etc. didn’t go anywhere either.

Can someone shed some light?

Thanks … Grant NQ5T


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]