Hi Peter,
AFX MD was allways OFF.
tnx es 73, paul
hb9axl
Am 01.12.2012 22:47, schrieb Peter Lambert:
> Try turning off the "delay" audio effect.
>
> Peter
> VK4JD
>
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]] On Behalf Of paul hippenmeyer
> Sent: Saturday, 1 December 2012 6:41 PM
> To:
[hidden email]
> Subject: [Elecraft] KX3, APF problem ?
>
> Hi,
>
> My little KX3 works great !
>
> Just noticed following:
> :
> * MODE: CW
> * CW bandwidth 50Hz
> * CW sig properly tunend in with CWT and SPOT
> * if CWT is ON: APF works perfect
>
> * then CWT OFF
> * when APF is turned ON, then received signal is significantly
> attenuated, why that ??
> * CW sig is still properly on zero beat !!
> * i can see this with bandwidths 100Hz or 50Hz only.
>
>
> firmware CPU 1.27, DSP 0.99
>
> 73, paul
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html