KX3 ATU no go

[Chris Meagher-4]

Have installed internal ATU into KX3, RX is good, menu set to AUTO
ATU appears on the display,
but when I press ATU TUNE, I get message NO ATU.
L&C checks produce relay clicks
Ideas anyone?
All pins checked inserted properly, full ESD precautions on installation.

Chris
VK2ACD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Oliver Dröse]

After having installed it and setting the menu to AUTO did you do a
power-cycle? Still the same problem after power off/on?

73, Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 27.11.2014 07:44, schrieb Chris Meagher:

> Have installed internal ATU into KX3, RX is good, menu set to AUTO
> ATU appears on the display,
> but when I press ATU TUNE, I get message NO ATU.
> L&C checks produce relay clicks
> Ideas anyone?
> All pins checked inserted properly, full ESD precautions on installation.
>
> Chris
> VK2ACD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[vk2rq]

Check that the PA Mode menu item is set to "OFF".

73,
Matt VK2RQ

> On 27 Nov 2014, at 5:44 pm, Chris Meagher <[hidden email]> wrote:
>
> Have installed internal ATU into KX3, RX is good, menu set to AUTO
> ATU appears on the display,
> but when I press ATU TUNE, I get message NO ATU.
> L&C checks produce relay clicks
> Ideas anyone?
> All pins checked inserted properly, full ESD precautions on installation.
>
> Chris
> VK2ACD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim GM]

Maybe I can help.

Go into Menu and check to see if PA MODE is OFF.

Also so checkVOX setting by using the DLY button next to the main tuning
knob and put in in PTT mode.

Let us know what happens.  I had the same thing happen when I remove the
KXPA 100 from the KX3.

--
Jim K9TF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]