|
Have there been any leaks as to the price point? Subject to change, of
course. Phil Philip LaMarche 727-944-3226 727-510-5038 Cell <http://www.w9dvm.com/> www.w9dvm.com <http://www.flamgroup.com/> WWW.FLAMGROUP.COM K3 # 1605 KPA500 # 029 P3 #1480 KAT500 #50 KX3 #1845 CCA 98-00827 CRA 1701 W9DVM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
I will put in a guess range:
Lower kit price range: $649 - $699 Upper range kit price range: $749 - $799 I prefer the lower kit price range. Justification for the price points above is that the K3 100 amp option is $500 and that is just a board basically. So, a box, a heat sink, and power adapter of some sort are additional over $500 (and, the $500 may be a tough sell these days, I mean if Elecraft were to release the K3/100 today I bet the 100-watt option would be more than $500. But, I am not actually planning on the PA as I prefer the KX3 for portable QRP ops and if I need 100 watts I have my K3/100. 73, phil, K7PEH On Mar 22, 2013, at 1:36 PM, Phil LaMarche <[hidden email]> wrote: > Have there been any leaks as to the price point? Subject to change, of > course. > > > > Phil > > > > Philip LaMarche > > > > > > 727-944-3226 > > 727-510-5038 Cell > > <http://www.w9dvm.com/> www.w9dvm.com > > <http://www.flamgroup.com/> WWW.FLAMGROUP.COM > > > > K3 # 1605 > > KPA500 # 029 > > P3 #1480 > > KAT500 #50 > > KX3 #1845 > > > > CCA 98-00827 > > CRA 1701 > > W9DVM > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
I think the price must be less than the new amp from TenTec (or, did TT mean Tom Terrific?).
The TenTec amp has a screen, buttons, and so on where as I got the impression that the brick style amp mentioned for the KX3 would have very little controls on it and that all displayed information would appear on the KX3 screen instead. Just a guess as I think that is the way I would do it (of course, this limits the UI for other non-Elecraft rigs). 73, phil, K7PEH On Mar 22, 2013, at 1:50 PM, Phil LaMarche <[hidden email]> wrote: > Thanks Phil. I too have the K3 and KPA500. I was just curious looking at > the 7 hundred price point from TT. > > Phil > > Philip LaMarche > > > 727-944-3226 > 727-510-5038 Cell > www.w9dvm.com > WWW.FLAMGROUP.COM > > K3 # 1605 > KPA500 # 029 > P3 #1480 > KAT500 #50 > KX3 #1845 > CCA 98-00827 > W9DVM > > > -----Original Message----- > From: Phil Hystad [mailto:[hidden email]] > Sent: Friday, March 22, 2013 4:46 PM > To: Phil LaMarche > Cc: [hidden email] > Subject: Re: [Elecraft] KX3 Amplifier > > I will put in a guess range: > > Lower kit price range: $649 - $699 > > Upper range kit price range: $749 - $799 > > I prefer the lower kit price range. Justification for the price points > above is that the K3 100 amp option is $500 and that is just a board > basically. So, a box, a heat sink, and power adapter of some sort are > additional over $500 (and, the $500 may be a tough sell these days, I mean > if Elecraft were to release the K3/100 today I bet the 100-watt option would > be more than $500. > > But, I am not actually planning on the PA as I prefer the KX3 for portable > QRP ops and if I need 100 watts I have my K3/100. > > 73, phil, K7PEH > > > > On Mar 22, 2013, at 1:36 PM, Phil LaMarche <[hidden email]> wrote: > >> Have there been any leaks as to the price point? Subject to change, of >> course. >> >> >> >> Phil >> >> >> >> Philip LaMarche >> >> >> >> >> >> 727-944-3226 >> >> 727-510-5038 Cell >> >> <http://www.w9dvm.com/> www.w9dvm.com >> >> <http://www.flamgroup.com/> WWW.FLAMGROUP.COM >> >> >> >> K3 # 1605 >> >> KPA500 # 029 >> >> P3 #1480 >> >> KAT500 #50 >> >> KX3 #1845 >> >> >> >> CCA 98-00827 >> >> CRA 1701 >> >> W9DVM >> >> >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net Please help support this email >> list: http://www.qsl.net/donate.html > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
Ten Tec is way to high on their QRP amp $700=100w not enough HP per Buck.
73, Fred/N0AZZ K3 Ser #'s 6730/5299--KX3 # 2573--K2/100--KAT100 P3/SVGA--KPA500--KAT500--W2 -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Phil Hystad Sent: Friday, March 22, 2013 4:09 PM To: Phil LaMarche Cc: [hidden email] List Subject: Re: [Elecraft] KX3 Amplifier I think the price must be less than the new amp from TenTec (or, did TT mean Tom Terrific?). The TenTec amp has a screen, buttons, and so on where as I got the impression that the brick style amp mentioned for the KX3 would have very little controls on it and that all displayed information would appear on the KX3 screen instead. Just a guess as I think that is the way I would do it (of course, this limits the UI for other non-Elecraft rigs). 73, phil, K7PEH On Mar 22, 2013, at 1:50 PM, Phil LaMarche <[hidden email]> wrote: > Thanks Phil. I too have the K3 and KPA500. I was just curious > looking at the 7 hundred price point from TT. > > Phil > > Philip LaMarche > > > 727-944-3226 > 727-510-5038 Cell > www.w9dvm.com > WWW.FLAMGROUP.COM > > K3 # 1605 > KPA500 # 029 > P3 #1480 > KAT500 #50 > KX3 #1845 > CCA 98-00827 > W9DVM > > > -----Original Message----- > From: Phil Hystad [mailto:[hidden email]] > Sent: Friday, March 22, 2013 4:46 PM > To: Phil LaMarche > Cc: [hidden email] > Subject: Re: [Elecraft] KX3 Amplifier > > I will put in a guess range: > > Lower kit price range: $649 - $699 > > Upper range kit price range: $749 - $799 > > I prefer the lower kit price range. Justification for the price > points above is that the K3 100 amp option is $500 and that is just a > board basically. So, a box, a heat sink, and power adapter of some > sort are additional over $500 (and, the $500 may be a tough sell these > days, I mean if Elecraft were to release the K3/100 today I bet the > 100-watt option would be more than $500. > > But, I am not actually planning on the PA as I prefer the KX3 for > portable QRP ops and if I need 100 watts I have my K3/100. > > 73, phil, K7PEH > > > > On Mar 22, 2013, at 1:36 PM, Phil LaMarche <[hidden email]> wrote: > >> Have there been any leaks as to the price point? Subject to change, >> of course. >> >> >> >> Phil >> >> >> >> Philip LaMarche >> >> >> >> >> >> 727-944-3226 >> >> 727-510-5038 Cell >> >> <http://www.w9dvm.com/> www.w9dvm.com >> >> <http://www.flamgroup.com/> WWW.FLAMGROUP.COM >> >> >> >> K3 # 1605 >> >> KPA500 # 029 >> >> P3 #1480 >> >> KAT500 #50 >> >> KX3 #1845 >> >> >> >> CCA 98-00827 >> >> CRA 1701 >> >> W9DVM >> >> >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net Please help support this >> list: http://www.qsl.net/donate.html > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 2641/6195 - Release Date: 03/21/13 ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 2641/6195 - Release Date: 03/21/13 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
| Free forum by Nabble | Edit this page |
