KX3 CW POWER ISSUE

[Gerry Miller]

 I NOTICED LAST NIGHT THAT WHEN IN CW MODE MY POWER OUTPUT WENT TO THE PREVIOUS SSB SETTING OF 14W.  I THOUGHT THE MAX WAS AUTOMATICALLY SET TO MAX OF 5 W WHEN IN CW MODE OR DO I HAVE SOME SW ISSUE IN MY RIG? KX3 VERY GENTLY USED SN 499X.  SW MCU-2.38, DSP1.37.  ANY SUGGESTIONS?GERRY MILLER, AA2ZJ  ([hidden email])
____________________________________________________________
How To Remove Eye Bags & Lip Lines Fast (Watch)
Fit Mom Daily
http://thirdpartyoffers.juno.com/TGL3141/59dbdf05121585f04394bst03vuc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Gerry,

The KX3 can be used at up to 15 watts for all modes below 20 meters.
Above that band it is reduced to 12 watts.

73,
Don W3FPR

On 10/9/2017 4:41 PM, Gerry Miller wrote:
>   I NOTICED LAST NIGHT THAT WHEN IN CW MODE MY POWER OUTPUT WENT TO THE PREVIOUS SSB SETTING OF 14W.  I THOUGHT THE MAX WAS AUTOMATICALLY SET TO MAX OF 5 W WHEN IN CW MODE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]