Actually, if you just want to listen to SSB and send CW, there are a couple of ways to achieve that even without Wayne's upcoming CW-in-SSB enhancement
1) set split mode on the KX3, with SSB on the RX VFO, and CW on the TX VFO
2) set the radio to CW mode, and open up the bandwidth of the PBT to let the SSB signal through. Tune off frequency by 600Hz or so to make the SSB sound clear (can use also use RIT if you want). You may need to select CW-R if you are wanting the opposite sideband.
Of course, none of this is as convenient as the CW-in-SSB feature will be, but it does allow you to participate in those cross mode situations like you often get with CW practice nets for example.
73, Matt VK2RQ
On 19/12/2012, at 8:15 AM, Don Wilhelm <
[hidden email]> wrote:
> Steve,
>
> Not yet.
> That is coming - it is one of the things on Wayne's "to-do" list.
>
> 73,
> Don W3FPR
>
> On 12/18/2012 3:50 PM, Steve Saslow wrote:
>> Is it possible to program/set up the KX3 so I can send CW while listening to either LSB or USB? Please advise! tnx This IS completely, simply possible, on the KX1... -maybe simple because it's a CW-only rig?73, Steve K7E
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
