KX3: Change filter NORM presets for SSB/CW

[Sven Ladegast]

Hello folks,

is it possible to change the NORM presets for the filter bandwidths for
SSB/CW modes at my KX3?

I find it a bit annoying that SSB defaults to 2.7 kHz and CW to 400 Hz.

Regards!

Sven, DJ2AT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Sven Ladegast]

None an idea??

I wonder why this should not be user-settable?

Sven, DJ2AT

Am 19.05.2014 09:55, schrieb Sven Ladegast:

> Hello folks,
>
> is it possible to change the NORM presets for the filter bandwidths for
> SSB/CW modes at my KX3?
>
> I find it a bit annoying that SSB defaults to 2.7 kHz and CW to 400 Hz.
>
> Regards!
>
> Sven, DJ2AT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Sven,

The NORM preset is fixed, but there are the per band, per mode settings
for NORM1 and NORM2 available to be customized as well as the I/II presets.
See page 24 of the manual.

73,
Don W3FPR

On 5/20/2014 8:03 AM, Sven Ladegast wrote:

> None an idea??
>
> I wonder why this should not be user-settable?
>
> Sven, DJ2AT
>
> Am 19.05.2014 09:55, schrieb Sven Ladegast:
>> Hello folks,
>>
>> is it possible to change the NORM presets for the filter bandwidths for
>> SSB/CW modes at my KX3?
>>
>> I find it a bit annoying that SSB defaults to 2.7 kHz and CW to 400 Hz.
>>
>> Regards!
>>
>> Sven, DJ2AT

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Phil Genera]

For the KX3? Page 24 of my manual deals with battery life and vfo friction
adjustment.

--
Phil


On Tue, May 20, 2014 at 8:52 AM, Don Wilhelm <[hidden email]> wrote:

> Sven,
>
> The NORM preset is fixed, but there are the per band, per mode settings
> for NORM1 and NORM2 available to be customized as well as the I/II presets.
> See page 24 of the manual.
>
> 73,
> Don W3FPR
>
>
> On 5/20/2014 8:03 AM, Sven Ladegast wrote:
>
>> None an idea??
>>
>> I wonder why this should not be user-settable?
>>
>> Sven, DJ2AT
>>
>> Am 19.05.2014 09:55, schrieb Sven Ladegast:
>>
>>> Hello folks,
>>>
>>> is it possible to change the NORM presets for the filter bandwidths for
>>> SSB/CW modes at my KX3?
>>>
>>> I find it a bit annoying that SSB defaults to 2.7 kHz and CW to 400 Hz.
>>>
>>> Regards!
>>>
>>> Sven, DJ2AT
>>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Sorry,

It is early morning for me and the eyes did not focus well - so my
response was for the K3.
For the KX3, the adjustability is not as great and there is only one
knob.  See page 12 of the KX3 manual.

73,
Don W3FPR

On 5/20/2014 9:05 AM, Phil Genera wrote:
> For the KX3? Page 24 of my manual deals with battery life and vfo friction
> adjustment.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Sven Ladegast]

Hello Don,

many thanks for your reply! But page 12 of the owner's manual does only
cover how to engange that preset and not how to set it. At the K3 these
presets are user-definable per mode which I really would like to see for
the KX3 too.

So if anyone of the firmware developers has some minutes time for this?

Kind regards!

Sven, DJ2AT

Am 20.05.2014 15:19, schrieb Don Wilhelm:

> Sorry,
>
> It is early morning for me and the eyes did not focus well - so my
> response was for the K3.
> For the KX3, the adjustability is not as great and there is only one
> knob.  See page 12 of the KX3 manual.
>
> 73,
> Don W3FPR
>
> On 5/20/2014 9:05 AM, Phil Genera wrote:
>> For the KX3? Page 24 of my manual deals with battery life and vfo
>> friction
>> adjustment.
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

--
Sven Ladegast
Mühlenstraße 10
98693 Ilmenau

Fon: 03677-4690104
Fax: [phone]
Mobil: 0160-7997552
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]