[KX3] I.F. Structure similar to k3??

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

[KX3] I.F. Structure similar to k3??

Edward R Cole
To put in slightly different terms:

The KX3 is a direct conversion radio and has no IF (intermediate
frequency).  e.g.  If you tune 14.305 USB, that signal mixes with the
VFO=14.305 MHz.  The result is audio.

But this is a SDR so more accurately the output is (approx) 3KHz
baseband audio in two streams phase shifted 90 degrees apart (the "I
and Q signals" which go to a A/D and are digitally demodulated by the
internal DSP processor).  This same IQ baseband is available for
export to a stereo soundcard for those wanting to run soundcard
programs (like psk-31, SSTV, or WSPR, etc.) on a computer.

ergo no IF.  I suppose you were wanting to connect to a P3?  I
believe the Elecraft folks have something planned to accomplish that
with a KX3 (your turn to comment, Wayne or Eric).


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep [hidden email]
"Kits made by KL7UW" http://www.kl7uw.com/kits.htm
======================================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html