KX3: I/Q out on TRANSMIT?

[K1LI]

I would like access to the I/Q signals produced by the DSP modulator on
transmit. Are these signals available on the rig's I/Q outputs?

Brian K1LI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Rich Heineck]

Brian,

The TX I/Q signals are only routed internally and aren't at any external
connector, though they do have labeled test points.  The I/Q connector
on the side is an RX output only.

73,
Rich  AC7MA


On 06/08/2013 04:49 AM, Brian Machesney wrote:

> I would like access to the I/Q signals produced by the DSP modulator on
> transmit. Are these signals available on the rig's I/Q outputs?
>
> Brian K1LI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ny4g]

Brian

At least in my setup using NaP3. The TX signal is visible on the panadaper display with no extra cables

Ariel

Sent from my iPhone

On Jun 8, 2013, at 10:30 AM, "Rich Heineck" <[hidden email]> wrote:

> Brian,
>
> The TX I/Q signals are only routed internally and aren't at any external connector, though they do have labeled test points.  The I/Q connector on the side is an RX output only.
>
> 73,
> Rich  AC7MA
>
>
> On 06/08/2013 04:49 AM, Brian Machesney wrote:
>> I would like access to the I/Q signals produced by the DSP modulator on
>> transmit. Are these signals available on the rig's I/Q outputs?
>>
>> Brian K1LI
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html