Tony,
Do you have to do this every time you want to operate?
Richard Fjeld, NØCE
"Buck, I have NaP3 running with my KX3, and it works fine. Set the global
offset to 0. NaP3 will automatically balance images if you give it a strong
signal to work on. I use my XG3 to put in a signal of S9+20 and tune the
KX3 about 20 khz above the XG3 signal. You'll see two spikes, but
eventually the right-hand spike will diminish. You can move the tuning
around a bit, and finally you'll see the image drop to 40db or even more
below the correct signal. When an antenna is connected, the images will be
invisible in the grass."
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
