KX3+K3 in SO2R

[Mark-3]

I've used a kx3 as the third radio in a so3r configuration.  I was low power but did not
see any additional issues with using a kx3 rather than a k3.  You may find it necessary
to use the 8 kHz offset to reduce the zero if bleed through if you don't have enough
inter band isolation.    

Mark. N2QT

> Message: 10
> Date: Tue, 25 Mar 2014 07:53:26 -0700
> From: Jeff Kinzli N6GQ <[hidden email]>
> To: Elecraft Reflector <[hidden email]>
> Subject: [Elecraft] KX3+K3 in SO2R
> Message-ID:
>    <CALfN8=[hidden email]>
> Content-Type: text/plain; charset=UTF-8
>
> Hello friends,
>
> I'm curious who has tried an SO2R setup of K3 as primary, and KX3 as
> secondary radios in a SO2R set up. If you did, did you find anything
> out of the ordinary with respect to the KX3 being the secondary radio?
> More prone to interference from the primary radio (or vise-versa)?
>
> My guess is that it should be just fine, but if someone's already
> walked in those shoes and worked through things I'd love to hear them.
>
> My plan is to use the K3+Acom amp as primary, KX3+100w amp as
> secondary, using the YCCC SO2R box as the controller. This will be for
> a DXpedition for CQWW SSB in October.
>
> Thanks

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]