Have had this working fine for a year until 2 months ago KX3 connected
briefly to the KXPA100 and then cut out.
The SYS LED light showed on the KXPA100
Have replaced PSU believing it to be a fault here.
Have sent KXPA100 to Waters and Stanton (UK) for inspection and returned
with clean bill of health.
Reconnected using the 'KX3 to KXPA100 adapter cable' and replaced both 25
amp fuses.
Same 'fault': KX3 cuts out straight away and no response at all now from the
KXPA100
Could a new set of adapter cables now be the answer??
(The KX3 works fine on the KX33 low power RFI supply)
Not a very technical person so please be gentle!!
Thanks for any thoughts
John
--
Sent from:
http://elecraft.365791.n2.nabble.com/______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
