KX3] KXPA100 will not manual tune

[Elecraft mailing list]

Was  working OK. Turned rig on today and when I hit tune on  the kX3 it  
does not tune.  Two dashes show up on upper right corner of display and shows
5watts. Led on  the amp under  25 is blinking. Same with dummy load. It will
auto tune OK. Strange to say the  least. Any ideas? 73 George/W2BPI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

["Hjalmar Duklæt"]

Disconnect the amp and computer from the KX3. Switch the KX3 on and off. Reconnect the amp and switch on the KX3. This worked for me. You might check the menu key "PA Mode" to see if it's on.
73 de Hal/la4xx

On 14-12-26 22:38, George via Elecraft  <[hidden email]> wrote:

>
> Was working OK. Turned rig on today and when I hit tune on the kX3 it
> does not tune. Two dashes show up on upper right corner of display and shows
> 5watts. Led on the amp under 25 is blinking. Same with dummy load. It will
> auto tune OK. Strange to say the least. Any ideas? 73 George/W2BPI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email] <[hidden email]>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]