KX3 MOD

[Richard Thorpe-2]

I've done the mod and still need the RX SHIFT and the VFO NR ON on all bands 15 meters and up through 50 MHz.
I am in a rural location and have very low noise on all bands, I guess the pin clipping cannot hurt.

K6CG/VE1 for the summer
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Tony Estep]

On Tue, Jul 9, 2013 at 7:22 AM, Richard Thorpe <[hidden email]> wrote:

> I've done the mod and still need the RX SHIFT
>
====

It worked great for me. With the antenna disconnected, I could hear VFO
noise only on 6 meters before the mod. After the mod, all is totally quiet.

The only strange result was that when I first turned the radio on after
cutting the pins, a message came up on the LCD: "OUCH!"

Tony KT0NY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html