KX3 Macros for Split Operation

[Buck - k4ia]

I have written a couple of Macros for the KX3 but need some help

This one will put the rig into Split, Xmt on VFOB, VFOB up 2, RIT=0,
XIT=0, Turn on Dual Watch, Clear the Menu off the screen

SWT25;SWT25;FT1;UPB5;RT0;XT0;MN140;MP016;SWH09;

This one will restore to regular operation (undoing above)

SWT25;SWT25;FT0;UPB0;MN140;MP000;SWH09;

Question #1: How do I make the OFS/B knob set to activate the B
function?  If it is on OFS, it will control VFO A and I want it to
control VFO B so I can tune to hear the other side of the pileup.
Nothing I do seems to alter whatever it was set to when I started.

Question #2:   I can't find a CONFIG:MACRO x menu item on the KX3 to
assign my masterpieces to a button.  How do I do that?  It looks like I
can assign a simple menu item to PF1/2 (page 19 of Operator Manual) but
I can't find anything about Macros.

Question #3:  Other than PF1 and PF2, how do I assign macros to other
keys?  The K3 had the M1 - M4 keys but they are not on the KX3.

--
Buck
k4ia
K3 # 101  KX3 #715
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html