KX3 Menu options and defaults

[N8CEP]

I recently purchased a used KX3. I want to check the menus to see if anything has been changed by the previous owner.
Is the menu list current in the online manual dated February 2013?  I know that firmware updates have been
issued since that manual was written.

Thanks for any help!
73 Keith N8CEP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Sven Ladegast]

> I recently purchased a used KX3. I want to check the menus to see if anything has been changed by the previous owner.
> Is the menu list current in the online manual dated February 2013?  I know that firmware updates have been
> issued since that manual was written.

Hello Keith,

the default setting can be found in the manual auf the KX3. All other
settings are adjustment-related and not so easily changeable by chance.

You can perform parts of the adjustment by yourself but TXSNUL
adjustment for example needs a spectrum analyzer.

If the rig is working fine the settings are most likely correct. I would
reset all values to the known default values and leave the adjustment
alone or adjust only the parts that you are able of (RXSNUL, TX gain,
VFO temperature compensation).

Regards!

Sven, DJ2AT

PS: Do not forget to save your new defaults using the KX3 utility!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

You do not need a current menu list to find the default settings - it is
in the KX3 menu help text.
When in the menu, scroll to any menu item of interest and hold the MENU
button for about 3 seconds to bring up the help display.  The default
value (if any) will be shown in parenthesis at the start of the help text.

73,
Don W3FPR

On 7/26/2014 10:15 PM, tuner wrote:
> I recently purchased a used KX3. I want to check the menus to see if anything has been changed by the previous owner.
> Is the menu list current in the online manual dated February 2013?  I know that firmware updates have been
> issued since that manual was written.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]