KX3 - PX3 Interconnects Lengths

[w4sc-2]

Has anyone located SHORTER cables for interconnects KX3 – PX3.  With the lengths supplied there is a big “wad” of cables remaining and in the way for the above/below stacking  I have.  Eight (8”) cables would more than suffice.
Ben W4SC

Sent from Mail for Windows 10

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[wayne burdick]

This was intended to allow the PX3 to be placed on either side of the radio, etc. Have you tried tucking the excess underneath the KX3?

Wayne
N6KR


> On Oct 24, 2019, at 11:27 AM, w4sc <[hidden email]> wrote:
>
>
> Has anyone located SHORTER cables for interconnects KX3 – PX3.  With the lengths supplied there is a big “wad” of cables remaining and in the way for the above/below stacking  I have.  Eight (8”) cables would more than suffice.
> Ben W4SC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Ingo Meyer, DK3RED-2]

Hello Wayne,


> This was intended to allow the PX3 to be placed on either side of the radio, etc. Have you tried tucking the excess underneath the KX3?

Only on one side of the KX3 is place for the PX3. On the other side there is the antenna
jack - at least on my transceiver. ;o) You would have to use an angled plug for the antenna.


73/72 de Ingo, DK3RED - Don't forget: the fun is the power!
www.qrp4fun.de - [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Grant Youngman-2]

It’s cleaner to use a right angle connector anyway, in my opinion.  Makes for a less clunky install.

Grant NQ5T

> On Oct 25, 2019, at 12:14 PM, Ingo Meyer, DK3RED <[hidden email]> wrote:
>
> Hello Wayne,
>
>
>> This was intended to allow the PX3 to be placed on either side of the radio, etc. Have you tried tucking the excess underneath the KX3?
>
> Only on one side of the KX3 is place for the PX3. On the other side there is the antenna jack - at least on my transceiver. ;o) You would have to use an angled plug for the antenna.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]