KX3/PX3 RIT Question

[K3WWP]

When I use the KX3 RIT, I get a red 'transmit' cursor on the PX3 which is
great. However when I press the 'B' knob to reset the RIT to zero, the RIT
resets, but the red cursor remains on the PX3 until I slightly turn the 'B'
knob, then it disappears. Just turning the 'B' knob (without pressing it) to
reset the RIT to zero gets rid of the red cursor as soon as zero is reached.
Everything works fine with Split. Turning off Split gets rid of the red
cursor immediately. I haven't tried XIT to see what happens with it because
I never use XIT. Any ideas what's going on?

* John K3WWP - 100% CW / QRP - Proudly promoting Morse Code:
*
* On the air with my KX3 #2325, K2 #6418, KX-1 #02101
*
* As retired NAQCC VP - # 0002 FC # 1 - http://naqcc.info/
*
* As retired FISTS Keynote QRP Columnist - # 2002 - http://www.fists.org/
*
* With my CW-QRP site - http://home.windstream.net/johnshan/

 










______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Paul Saffren N6HZ]

Hi John,

I just verified this on my unit here at Elecraft.  Thanks, it looks like you found a bug between the KX3 and PX3.  I think the KX3 is probably not telling the PX3 that the RIT was cleared.


Kind regards,

Paul