KX3 Roofing filter

[cheng076]

I have 2 KX3s that I intend to use in 2 different locations. One is an older one that has a roofing filter and the newer one does not. I want to swap the filter from the older one to the newer one. Do I have to be concerned with the changes made when I calibrated the older one on installing the roofing filter?

PJH, N7PH
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-5]

PJH,

You must run the calibration routine anytime you install or uninstall
the roofing filter.

73,
Don W3FPR

On 6/12/2021 3:19 PM, PATRICK HICKS wrote:
> I have 2 KX3s that I intend to use in 2 different locations. One is an older one that has a roofing filter and the newer one does not. I want to swap the filter from the older one to the newer one. Do I have to be concerned with the changes made when I calibrated the older one on installing the roofing filter?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]