KX3 SPL N/A Message
Locked
 
|
KX3 + KXPA 100 + PX3 (upgraded to latest firmware)
Mode: DATA A Band: Any In WSJT-X I enabled Rig Split operation. Running FT8 mode. At the beginning of every transmit I briefly see "SPL N/A" Not sure why or what it means. I made QSOs, previously I used Split Operation "Non" and "Fake It" settings and they work just fine. Any explanation of "SPL N/A" appreciated - RTFM does not yield any answers unless I missed something. 73 de k1jbd Bammi ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In order to operate split with data modes, both VFO A and B must be in ‘Data’ mode. The quickest way to make this happen is to hit the ‘A=B’ button which would set both to the same frequency and mode. Then WSJT should work in split mode.
Not sure why WSJT doesn’t automatically do this, but it may be a difference from the K3 to the KX3. Will Hrachovina K4MI Sent from my iPhone for Verizon > Previous message follows: > KX3 + KXPA 100 + PX3 (upgraded to latest firmware) > > > > Mode: DATA A > > Band: Any > > > > In WSJT-X I enabled Rig Split operation. Running FT8 mode. > > > > At the beginning of every transmit I briefly see "SPL N/A" > > Not sure why or what it means. > > > > I made QSOs, previously I used Split Operation "Non" and "Fake It" settings > and they work just fine. > > > > Any explanation of "SPL N/A" appreciated - RTFM does not yield any answers > unless I missed something. > > > > 73 de k1jbd > > Bammi ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Mine did. If you tell wsjt to use split it will set it.
Sent from my iPhone ...nr4c. bill > On May 21, 2020, at 9:00 AM, Will Hrachovina K4MI <[hidden email]> wrote: > > In order to operate split with data modes, both VFO A and B must be in ‘Data’ mode. The quickest way to make this happen is to hit the ‘A=B’ button which would set both to the same frequency and mode. Then WSJT should work in split mode. > > Not sure why WSJT doesn’t automatically do this, but it may be a difference from the K3 to the KX3. > > Will Hrachovina > K4MI > Sent from my iPhone for Verizon > >> Previous message follows: >> KX3 + KXPA 100 + PX3 (upgraded to latest firmware) >> >> >> >> Mode: DATA A >> >> Band: Any >> >> >> >> In WSJT-X I enabled Rig Split operation. Running FT8 mode. >> >> >> >> At the beginning of every transmit I briefly see "SPL N/A" >> >> Not sure why or what it means. >> >> >> >> I made QSOs, previously I used Split Operation "Non" and "Fake It" settings >> and they work just fine. >> >> >> >> Any explanation of "SPL N/A" appreciated - RTFM does not yield any answers >> unless I missed something. >> >> >> >> 73 de k1jbd >> >> Bammi > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: KX3 SPL N/A Message
|
|
In reply to this post by Elecraft mailing list
Thank You Will @ K4MI
That ( hitting "A=B") solved the problem. I am guessing that this may be a KX3 specific quirk. Not exactly sure what CAT message WSJT sends the rig, or may also be likely that my CAT is via OMNIRIG which may not be passing enough detail through to the rig. 73 de k1jbd Bammi * In order to operate split with data modes, both VFO A and B must be in 'Data' mode. The quickest way to make this happen is to hit the 'A=B' button which would set both to the same frequency and mode. Then WSJT should work in split mode. * Not sure why WSJT doesn't automatically do this, but it may be a difference from the K3 to the KX3. * Will Hrachovina ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |