Thanks Ron for the advice. We found a suitable way to mount the rig. My guess is that we will need to revisit this down the road. We are about 35% complete with the install. When it is done I will post some pictures of it on my qrz and add it to my blog.
Keith
AG6AZ
Sent from my iPhone please excuse typos
On Sep 1, 2012, at 12:13 PM, "Ron D'Eau Claire" <
[hidden email]> wrote:
> Keith, the screws that are used to secure to speaker to the case are 2-56
> 1/4". However, they screw (self-thread) into the relatively soft plastic
> speaker frame so they cannot handle any significant mechanical force beyond
> holding the speaker in place.
>
> 73, Ron AC7AC
>
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]] On Behalf Of Keith Heimbold
> Sent: Saturday, September 01, 2012 11:20 AM
> To: Elecraft Group
> Subject: [Elecraft] KX3 Speaker Screw size
>
> I am working on installing my KX3 in my truck and I am curious what size
> screw is used between the case and speaker mount. We are examining ways to
> physically mount the KX3 into my silverado. The mount we are likely using
> is a Panavice.
>
> Thanks,
>
> Keith
> AG6AZ
>
> Sent from my iPhone please excuse typos
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
