Shortly after I got my KX3, #1716 I think, I noticed some moderate drift while doing PSK31. I bought, built and ran the Extende d VFO C ompensation procedure and things improved. Now, about a year or 18 months later I am told I have drift showing up on my signal. I re-ran the procedure and all appears to bbe good. My question regards the last statement on pg 5 of the procedure yhat says " Be sure to perform the RECAL calibration at room temperature, as described in your KX3 manual.". Is this statement in referance to the 'Initial Reference Calibration' done at the start of the procedure or to the procedure in the manual which I have already done? Must it be done again after the VFO procedure?
I guess it wouldn't hurt to do it again but is it necessary?
PJH, N7PXY
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
