A few days ago, I came across this screwdriver controller
(
http://www.tunematic.us). It is advertised to connect to a KX3. It
looks like it would work good, but for one thing. The baud rate needs to
be set to 4800. If there is a KPX100 connected, there is no connection
with the amp,since you can not change the baud rate in the amp.
My goal is to have a one button tune for my Tarheel when mobile, for
safety reasons. I can use the manual button, but then need to put the
KX3 in tune, then watch the meter for lowest SWR.
Has anyone found a way to do this? Any ideas?
--
Carl
AB1DD
Resistance is futile.
(don't know about reactance, though)
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
