I loaded the KX3Utility 1.14.4.11for Linux. It talks to the KX3 just
fine at 38400. But when I click on "Copy new files from Elecraft" it
says unable to connect error 127, whatever that means.
The FTP Timeout.htm page says the IP address should be 63.249.74.212.
But when I ping ftp.elecraft.com I get an IP address of 50.31.74.52 with
a rtt of 65 msec.
BOTH addresses ping okay.
I can manually connect to the ftp.elecraft.com site and download the
firmware files manually.
I was able to copy the newly downloaded files into the
./Elecraft/KX3_Firmware directory and successfully load them that way
using the KX3 utility.
Any suggestions on why it failed to automatically download them?
Ron W7HD
Tucson, AZ
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
