VFO B tunes at the same rate as VFO A for a given mode. Assuming you're not using cross-mode, then you can just change the rate for A, and the rate for B will be the same.
Normal tuning rate is 10 Hz per step. Tapping RATE switches to 1-Hz tuning. Holding KHZ switches to coarse tuning. All will apply to both VFOs.
To change the coarse tuning rate for a give mode, use MENU:VFO CRS.
To change the total steps per VFO knob rotation, use MENU:VFO CTS (128 or 256 counts per turn).
73,
Wayne
N6KR
On Feb 23, 2016, at 9:15 AM, "Tim Cook" <
[hidden email]> wrote:
> Is there any way to change the tuning rate for VFO B? Using the dual watch
> mode and trying to find where the dx is listening using VFO B is a little
> difficult with such a slow tuning rate. I checked the manual and reflector
> archives but cannot locate any information about changing the tuning rate,
> maybe it's fixed at the 70hz per turn for VFO B. (at least that's what my
> KX3 does). The other possibility is that I'm completely missing the boat on
> this and am just not seeing it.
>
>
>
> Thanks
>
> Tim
>
> NZ8J.
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
