If your intent is to run PSK from the usual kind of PSK software that
works with non-Elecraft radios, i.e. software that generates a PSK
signal at audio frequencies to be fed into a radio's microphone or line
in input in SSB mode, then you should be putting your KX3 into DATA A
mode. DATA A is basically a specialized version of USB, with audio
equalization and compression disabled and different default filter
settings. VOX works in DATA A mode.
To use PSK D mode, you would need software that sends the ASCII text you
want to send to the radio via the radio control port, and that controls
TX/RX switching via the same pathway. Standard audio-based PSK software
that works with non-Elecraft radios will not work with PSK D.
73,
Rich VE3KI
Randy Buckspan wrote:
> I want to run PSK via my iPhone and KX3 using an interface that requires
> VOX to trigger transmit. With the KX3 in DATA Mode and PSK D, VOX is N/A.
> My only choice is to run USB and enable VOX. Is there a way that VOX can
> be enabled in DATA Mode, or am I missing something?
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
