Yesterday I put together an interface cable to interface the KX3 to my MicroHam USB Interface III.
The results turned out to be very good, the MicroHam USB III works very well with my KX3.
I have posted the wiring diagram here:
http://lh6.ggpht.com/-gDPTphLWxyg/UFyZpnZ7pMI/AAAAAAAAErA/X9TueMFXJO0/s1600-h/DB15-EL-KX3_Cable%25255B13%25255D.jpgI had to made the interface cable myself because MicroHAM does not make a cable for the KX3.
(If for some reason you're not able to view the drawing, you may go in and click the drawing on my Norwegian blog page:
http://arcticpeak.blogspot.no/2012/09/interfacekabler-for-elecraft-kx3-og.html )
The MicroHAM USB Interface III is a nice litle interface for voice, CW and digimode with a built-in USB soundcard.
The MicroHAM USB Interface III also provides control (frequency, mode, etc) of the transceiver and PTT, all with one USB cable to the PC.
http://microham.com/contents/en-us/d158.htmlMartin Storli
LA8OKA
Oslo, Norway
ARCTICPEAK's Radio pages!
http://www.arcticpeak.com/radio.htm______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
