KX3 and RumLog for Mac

[Jim GM]

Hi

I am having issues in getting RumLog Version 5.3.7 logging program working
with my KX3. How do I set up RumLog to work? What do I need to set in
preferences?

I am able to get KX3 Utility to work fine so there is no issue there I do
not think.

--
Jim K9TF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Rick Prather-3]

What type of "issues"  Jim?

Where do you get stuck?

Did you select  K2/K3  in the TRX 1 section of RUMlog preferences?  Does
your USB adaptor show in that page?

If so, did you go to the Transceiver drop down and select Relinit TRX1 ?

Then what happens?  BTW, you aren't trying to connect to RUMlog with the K3
Utility still connected are you?

GL,

Rick
K6LE


On Sun, Jun 8, 2014 at 11:17 AM, Jim GM <[hidden email]> wrote:

> Hi
>
> I am having issues in getting RumLog Version 5.3.7 logging program working
> with my KX3. How do I set up RumLog to work? What do I need to set in
> preferences?
>
> I am able to get KX3 Utility to work fine so there is no issue there I do
> not think.
>
> --
> Jim K9TF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill Frantz]

I just got RUMLog to work my spiffy new KX3 (#6454). I had it
working with my K3 before hand.

I set up the second transmitter (TRX 2) as an "Elecraft K2/K3",
set the Baud to 4800, matching the default in the KX3, and
selected the usbserial-A7030ASS which was the interface I used
to save the configuration. I recommend getting it to work with
the KX3 Mac utility first. The utility has more debugging aids
(like "Test Communication").

73 BIll AE6JV

On 6/8/14 at 11:17 AM, [hidden email] (Jim GM) wrote:

>I am having issues in getting RumLog Version 5.3.7 logging program working
>with my KX3. How do I set up RumLog to work? What do I need to set in
>preferences?

-----------------------------------------------------------------------
Bill Frantz        | QRP: So you can talk about   | Periwinkle
[phone]      | the ones that got away.      | 16345
Englewood Ave
www.pwpconsult.com |                              | Los Gatos,
CA 95032

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim GM]

Hi Bill

KX3 Mac Utility is working just fine except for AFSK I think user error and
will figure it out later.  I did see that and had set Baud to 4800 on
RumLog. usbserial-A703095C was selected for the port. I had also turned off
the KX3 Utility and RumLog is not working.

I tried turning off and on the KX3 and RumLog in different sequences and
RumLog still does not key the KX3.

In RumLog what settings am I missing?
--
Jim K9TF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim GM]

Thank you Joel

Is that all I had to do?  I had it set for 4800 KX3 default. Setting the
baud rate to 38400 did it. Cant't wait to see what fun I will have with it.
Age here is 61 and had my ticket since May of 1968.
--
Jim K9TF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]