KX3 controlling K3s over Remote....

[Gerry Hull]

I want to use my KX3 to control K3s while traveling.

Rather than buying another control cable, I have lots of parts around...

Will the KX3 work with 3.3v or 5v Serial signals?

If not, I presume I can run KX3-> COM2 control port on RRC (12v levels),
thus controlling the
remote K3.

73, Gerry W1VE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Gerry Hull]

Figured this out myself -- If anyone is interested, you switch both the
RemoteRig boxes to Mode 4: Elecraft, Yaesu, Icom.  You cannot use the rig
to turn on the K3, but the connect button on the control-side RRC web page
does.

73, Gerry W1VE




On Mon, Jul 2, 2018 at 2:33 PM Gerry Hull <[hidden email]> wrote:

> I want to use my KX3 to control K3s while traveling.
>
> Rather than buying another control cable, I have lots of parts around...
>
> Will the KX3 work with 3.3v or 5v Serial signals?
>
> If not, I presume I can run KX3-> COM2 control port on RRC (12v levels),
> thus controlling the
> remote K3.
>
> 73, Gerry W1VE
>
>
>
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]