Jeff,
The "sweet spot" for the K3/K3S or KX3 is most anywhere in the 300 to
3000 Hz range.
That is *IF* you are using DATA A submode where the TX and RX
equalization is set to flat and the compression is turned off.
If you are trying to use SSB mode, you can follow the "internet advice",
but the using the Elecraft gear, you should follow the Elecraft manual -
it behaves differently than most transceivers and has special provisions
for data modes that are absent in other transceivers.
The Fldigi manual is written for the 'other' transceivers because they
are more plentiful.
73,
Don W3FPR
On 10/13/2016 9:33 PM, Thorpe, Jeffrey wrote:
> I'm going though the FLDigi manual and have come across (at the "Operating Controls and Displays" section, regarding the QSY button) a reference to the 'sweet spot' and setting parameters for it in the configuration screen. How do you find that? Is that just a 'given' at a particular frequency for the KX3 with the filter option installed?
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
