I downloaded the latest and greatest firmware and noticed something On the 40m band, while monitoring one of the 'original 13 colonies special event station'. The unit freq was drifting (upwards) big time. Somethings by .2 units within about 1.5 seconds. And even when I returned to the frequency it would drift again. While I did not have a lot of time to further test. The issue was not apparent on the 20m band. I have had this issue previously, but not to this level. Also a small observation. Now when the unit is shut down, on the VFO B, a series of ***** appear. This has not been observered before Robert a 'kosher' ham Sent from my BlackBerry device ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
What mic are you using? If you are using something with a stereo plug, you
might be triggering the UP button input. ...bc nr4c Sent from my Verizon Wireless Droid -----Original message----- From: [hidden email] To: Elecraft list <[hidden email]> Sent: Fri, Jul 6, 2012 16:54:07 GMT+00:00 Subject: [Elecraft] KX3 firmware 1.06 freg drift I downloaded the latest and greatest firmware and noticed something On the 40m band, while monitoring one of the 'original 13 colonies special event station'. The unit freq was drifting (upwards) big time. Somethings by .2 units within about 1.5 seconds. And even when I returned to the frequency it would drift again. While I did not have a lot of time to further test. The issue was not apparent on the 20m band. I have had this issue previously, but not to this level. Also a small observation. Now when the unit is shut down, on the VFO B, a series of ***** appear. This has not been observered before Robert a 'kosher' ham Sent from my BlackBerry device ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by va3bxg
The asterisks are new. I don't remember which version (after 0.99 up
through 1.06) had that change. On Fri, Jul 6, 2012 at 12:54 PM, <[hidden email]> wrote: > > > I downloaded the latest and greatest firmware and noticed something > > On the 40m band, while monitoring one of the 'original 13 colonies special > event station'. The unit freq was drifting (upwards) big time. Somethings > by .2 units within about 1.5 seconds. And even when I returned to the > frequency it would drift again. > > While I did not have a lot of time to further test. The issue was not > apparent on the 20m band. > > I have had this issue previously, but not to this level. > > Also a small observation. Now when the unit is shut down, on the VFO B, a > series of ***** appear. This has not been observered before > Robert > > a 'kosher' ham > Sent from my BlackBerry device > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Administrator
|
Sharp eyes, guys. I added this in rev 1.06 for my use in verifying
that the power-down sequence worked correctly. No functional impact. Wayne JP O'Connor wrote: > The asterisks are new. I don't remember which version (after 0.99 up > through 1.06) had that change. > > <[hidden email]> wrote: > >> Also a small observation. Now when the unit is shut down, on the >> VFO B, a >> series of ***** appear. This has not been observered before.... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Nr4c
The elecraft supplied mic ordered at the same time as KX3
And it is the mic that I have been using since the beginning Robert a 'kosher' ham Sent from my BlackBerry device -----Original Message----- From: "Bill Conkling"<[hidden email]> Sender: "[hidden email]"@widomaker.com Date: Fri, 6 Jul 2012 13:16:34 To: <[hidden email]>; Elecraft list<[hidden email]> Subject: Re: [Elecraft] KX3 firmware 1.06 freg drift What mic are you using? If you are using something with a stereo plug, you might be triggering the UP button input. ...bc nr4c Sent from my Verizon Wireless Droid -----Original message----- From: [hidden email] To: Elecraft list <[hidden email]> Sent: Fri, Jul 6, 2012 16:54:07 GMT+00:00 Subject: [Elecraft] KX3 firmware 1.06 freg drift I downloaded the latest and greatest firmware and noticed something On the 40m band, while monitoring one of the 'original 13 colonies special event station'. The unit freq was drifting (upwards) big time. Somethings by .2 units within about 1.5 seconds. And even when I returned to the frequency it would drift again. While I did not have a lot of time to further test. The issue was not apparent on the 20m band. I have had this issue previously, but not to this level. Also a small observation. Now when the unit is shut down, on the VFO B, a series of ***** appear. This has not been observered before Robert a 'kosher' ham Sent from my BlackBerry device ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Nr4c
The elecraft supplied mic ordered at the same time as KX3
And it is the mic that I have been using since the beginning Robert a 'kosher' ham Sent from my BlackBerry device -----Original Message----- From: "Bill Conkling"<[hidden email]> Sender: "[hidden email]"@widomaker.com Date: Fri, 6 Jul 2012 13:16:34 To: <[hidden email]>; Elecraft list<[hidden email]> Subject: Re: [Elecraft] KX3 firmware 1.06 freg drift What mic are you using? If you are using something with a stereo plug, you might be triggering the UP button input. ...bc nr4c Sent from my Verizon Wireless Droid -----Original message----- From: [hidden email] To: Elecraft list <[hidden email]> Sent: Fri, Jul 6, 2012 16:54:07 GMT+00:00 Subject: [Elecraft] KX3 firmware 1.06 freg drift I downloaded the latest and greatest firmware and noticed something On the 40m band, while monitoring one of the 'original 13 colonies special event station'. The unit freq was drifting (upwards) big time. Somethings by .2 units within about 1.5 seconds. And even when I returned to the frequency it would drift again. While I did not have a lot of time to further test. The issue was not apparent on the 20m band. I have had this issue previously, but not to this level. Also a small observation. Now when the unit is shut down, on the VFO B, a series of ***** appear. This has not been observered before Robert a 'kosher' ham Sent from my BlackBerry device ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |