KX3 integration with the KPA500?

[AC6JA]

Does anyone know if the KX3 will eventually be integrated to work closely  
with the KPA500?
I know it works right now putting out about 80w out with 5w in, 160w out  
with 10w in, and 200w out with 12w in.
It would be nice if the KX3 worked as seamlessly with the KPA500 as does  
the K3!
 
Mike  AC6JA
 
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Brett Howard]

I don't see how it could without having an auxbus port.  However the KX3
may already output Kenwood data on the serial port.  If that is the case it
might work to use the RS232 port on the KPA500 to talk to the KX3.

~Brett (N7MG)


On Mon, Jan 14, 2013 at 9:42 AM, <[hidden email]> wrote:

> Does anyone know if the KX3 will eventually be integrated to work closely
> with the KPA500?
> I know it works right now putting out about 80w out with 5w in, 160w out
> with 10w in, and 200w out with 12w in.
> It would be nice if the KX3 worked as seamlessly with the KPA500 as does
> the K3!
>
> Mike  AC6JA
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html