As far as I knew the KX3 supports none of the menu settings that you mention
until Wayne writes the software. They only work in a K3.
Dave
G4FRE
From: Erik Overbye Olsen <
[hidden email]>
To:
[hidden email]
Subject: [Elecraft] KX3 offset with transverter
Message-ID: <
[hidden email]>
Content-Type: text/plain; charset=us-ascii
Hi list
I use the Xv144 transverter together with the KX3
Unfortunately the local oscillator in my XV144 still has an offset on +5KHz
still after the L14 modification
So i want to set the offset from the XV OFS menu in the KX3
I have tried +5KHz and -5KHz but there is no difference in my readout, it
still show 5Khz to much
My MCU sw is 1.30 and DSP 1.02
Setup on the KX3 is:
XV1 on Yes
XV1 RF 144
XV1 IF 28
XV1 PWR 5
XV1 OFS5.0
XV1 ADR TR1
Ant idea what i may have done wrong?
73es de Erik
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
